Seam roof penetration tip This past week, we looked at examples of pipe penetrations through a standing seam metal roof. We also talked about some

Standing Seam Roof Penetrations – Part I: Critical Challenges and Proven Solutions Today, we’re looking at a standing seam roof. Standing seam roofs are one

Advanced Insights on Surface Cracking at BUR Flat Roofs – Part II This past week, we started looking at a built-up roof covered with a

Understanding Surface Cracking at BUR Flat Roofs – Causes & Solutions (Part 1) The photo below shows an example of an older, low-scope roof system

Protect your home with proper low roof termination Here in Washington DC, the circumstances for low slope roof installation are a bit unique because low

Gambrel Standing Design with Seam Red Roof Most of the time, here on our blog and on our website, we are looking at examples and

Front Porch Roofs: Key Maintenance Tips and Common Repair Needs This past week, we took a specific look at one of these roofs at the

Why front porch roofs need timely attention and care Today, we’re looking at front porch roofs, but not just not just looking at one specific

Directing water with a built-up inside roof corner It’s a relatively commonly understood principle that the majority of a rooftop surface should consistently shed water.

Rooftop HVAC Systems: Pros and Cons We’ve looked at the topic of ductwork on rooftops before here on our website and on our blog. Today,