
Surface Cracking at BUR Flat Roof Surface – Part 1
Understanding Surface Cracking at BUR Flat Roofs – Causes & Solutions (Part 1) The photo below shows an example of an older, low-scope roof system

Understanding Surface Cracking at BUR Flat Roofs – Causes & Solutions (Part 1) The photo below shows an example of an older, low-scope roof system

Protect your home with proper low roof termination Here in Washington DC, the circumstances for low slope roof installation are a bit unique because low

Gambrel Standing Design with Seam Red Roof Most of the time, here on our blog and on our website, we are looking at examples and

Front Porch Roofs: Key Maintenance Tips and Common Repair Needs This past week, we took a specific look at one of these roofs at the

Why front porch roofs need timely attention and care Today, we’re looking at front porch roofs, but not just not just looking at one specific

Directing water with a built-up inside roof corner It’s a relatively commonly understood principle that the majority of a rooftop surface should consistently shed water.

Rooftop HVAC Systems: Pros and Cons We’ve looked at the topic of ductwork on rooftops before here on our website and on our blog. Today,

I-Beams for Rooftop Equipment Support A little while back, we took a look at several rooftops with solar panels installed on top of the roofs.

Enhancing Stability on Low-Slope Roofs with Aggregate Ballasts This past week, we began looking at similar images of a low slope roof with an aggregate

ggregate Ballasts for Low-Slope Roofs Recently, we got a chance to take a look at a aggregate ballast covered roof. Historically, here in Washington, DC,
© Copyrights 2023 Dupont Roofing DC All Rights Reserved